<xmp id="oumyq"><div id="oumyq"></div>
  • <small id="oumyq"></small>
  • <small id="oumyq"><li id="oumyq"></li></small>
  • <small id="oumyq"><div id="oumyq"></div></small><small id="oumyq"><li id="oumyq"></li></small>
  • <div id="oumyq"></div>
  • <small id="oumyq"><li id="oumyq"></li></small>
  • <small id="oumyq"><li id="oumyq"></li></small><li id="oumyq"></li><small id="oumyq"><li id="oumyq"></li></small><div id="oumyq"></div>
  • <small id="oumyq"></small>
    <button id="oumyq"></button>
  • <label id="oumyq"></label>
  • <small id="oumyq"><li id="oumyq"></li></small><div id="oumyq"></div><li id="oumyq"></li>
  • <div id="oumyq"><button id="oumyq"></button></div>
  • 日本三豐500系列ABS數顯卡尺 Mitutoyo

    2019年04月26日

    500181_01.jpg

     

    ABSOLUTE數顯卡尺 500系列 采用特有的ABSOLUTE編碼器技術 CD-AX
    ABSOLUTE Digimatic Caliper Series 500-with Exclusive ABSOLUTE Encode Technology
    ——————————————————————
    • 電磁感應編碼器允許暴露在冷卻液、水、塵或油的車間環境下使用。
    • 新型人體工學設計。
    • 尺框可通過ZERO/ABS鍵在任意位置調零,以便進行比較測量。此開關也能返回絕對原點(ABS)坐標位置并顯示距離原點(通常為量爪閉合點)的實際位置。
    • 大型清晰的液晶讀數顯示。
    • 尺框平滑移動,舒適操作。
    • 18,000小時電池壽命。
    • 允許階差測量。
    • 帶有硬質合金量爪的卡尺是測量粗加工產品,鑄造件及研磨石等的最佳選擇。
    • 對有測量數據輸出接口的型號,可以被應用于統計過程控制和測量系統中。

    FEATURES
    Mitutoyo's absolute Digimatic Caliper is the next generation of electronic calipers.
    It keeps track of its origin point once set. Whenever turned on, the large LCD
    displays the actual slider position ready to start measurement. No more repeated
    zero setting is necessary with the absolute encoder technology, as well as no more
    concern for over speed errors.

    • Large and clear LCD readout.
    • The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for
    incremental comparison measurements. This switch will also allow return to the absolute (ABS)
    coordinate and display of the true position from the origin point (usually jaws-closed point).
    • Data Hold Unit (959143) is optional.
    • Carbide-tipped jaw type calipers are also available.
    • With thumb roller. Except 500-500-10, 500-501-10,500-502-10.
    • Supplied in fitted plastic case. Except 1000mm/40"supplied in wooden case.
    規格
    精度: ±0.02mm (測量范圍小于等于200mm 型號),
    ±0.03mm (測量范圍小于等于300mm 型號)
    (不包括量化偏差)
    分辨力: 0.01mm
    重復精度: 0.01mm
    顯示: 液晶顯示
    長度標準: ABSOLUTE電磁感應式線性編碼器
    最大響應速度: 無限制
    電池: SR44 (1 個), 938882 用于初始操作檢查 (標準附件)
    電池壽命: 正常使用情況下約為3.5年 (連續使用18,000小時)
    Technical Data 
    Accuracy: Refer to the list of specifications
    Resolution: 0.01mm or .0005"/0.01mm
    Repeatability: 0.01mm / .0005” 
    Display: LCD
    Length standard: ABSOLUTE electrostatic capacitance type
    linear encoder
    Max. response speed: Unlimited
    Battery: SR44 (1 pc.), 938882
    Battery life: Approx. 3.5 years under normal use
    公英制型號 ↓
    Order No Model Range Accuracy LCD Res Remarks
    500-170-30 AOS Digimatic Caliper 0-4in
    0-100mm
    ±.001in .0005in
    0.01mm
    .075" Round depth bar
    500-195-30* AOS Digimatic Caliper 0-4in
    0-100mm
    ±.001in .0005in
    0.01mm
    .075" Round depth bar
    500-171-30 AOS Digimatic Caliper 0-6in
    0-150mm
    ±.001in .0005in
    0.01mm
    -
    500-174-30 AOS Digimatic Caliper 0-6in
    0-150mm
    ±.001in .0005in
    0.01mm
    with OD carbide jaw
    500-175-30 AOS Digimatic Caliper 0-6in
    0-150mm
    ±.001in .0005in
    0.01mm
    with OD,ID carbide jaw
    500-178-30 AOS Digimatic Caliper 0-6in
    0-150mm
    ±.001in .0005in
    0.01mm
    .075 in rod depth bar
    500-196-30* AOS Digimatic Caliper 0-6in
    0-150mm
    ±.001in .0005in
    0.01mm
    -
    500-159-30* AOS Digimatic Caliper 0-6in
    0-150mm
    ±.001in .0005in
    0.01mm
    Carbide-tipped jaws for OD measurement
    500-160-30* AOS Digimatic Caliper 0-6in
    0-150mm
    ±.001in .0005in
    0.01mm
    Carbide-tipped jaws for OD and ID measurement
    500-172-30 AOS Digimatic Caliper 0-8in
    0-200mm
    ±.001in .0005in
    0.01mm
    -
    500-176-30 AOS Digimatic Caliper 0-8in
    0-200mm
    ±.001in .0005in
    0.01mm
    with OD carbide jaw
    500-177-30 AOS Digimatic Caliper 0-8in
    0-200mm
    ±.001in .0005in
    0.01mm
    with OD,ID carbide jaw
    500-197-30* AOS Digimatic Caliper 0-8in
    0-200mm
    ±.001in .0005in
    0.01mm
    -
    500-163-30* AOS Digimatic Caliper 0-8in
    0-200mm
    ±.001in .0005in
    0.01mm
    Carbide-tipped jaws for OD measurement
    500-164-30* AOS Digimatic Caliper 0-8in
    0-200mm
    ±.001in .0005in
    0.01mm
    Carbide OD/ID Jaws
    500-173 Digimatic Caliper 0-12in
    0-300mm
    ±.0015in .0005in
    0.01mm
    -
    500-167 Digimatic Caliper 0-12in
    0-300mm
    ±.0015in .0005in
    0.01mm
    Carbide-tipped jaws for OD measurement
    500-168 Digimatic Caliper 0-12in
    0-300mm
    ±.0015in .0005in
    0.01mm
    Carbide-tipped jaws for OD and ID measurement
    500-193* Digimatic Caliper 0-12in
    0-300mm
    ±.0015in .0005in
    0.01mm
    -
    500-165* Digimatic Caliper 0-12in
    0-300mm
    ±.0015in .0005in
    0.01mm
    Carbide-tipped jaws for OD measurement
    500-166* Digimatic Caliper 0-12in
    0-300mm
    ±.0015in .0005in
    0.01mm
    Carbide-tipped jaws for OD and ID measurement
    500-505-10 Digimatic Caliper 0-18in
    0-450mm
    ±.002in .0005in
    0.01mm
    Without Thumb Roller
    500-506-10 Digimatic Caliper 0-24in
    0-600mm
    ±.002in .0005in
    0.01mm
    Without Thumb Roller
    500-507-10 Digimatic Caliper 0-40in
    0-1000mm
    ±.003in .0005in
    0.01mm
    Without Thumb Roller

     

    公制型號 ↓

     

    Order No Model Range Accuracy LCD Res Remarks
    500-150-30 AOS Digimatic Caliper 0-100mm ±0.02mm 0.01mm Ø1.9mm rod depth bar
    500-151-30 Digimatic Caliper 0-150mm ±0.02mm 0.01mm -
    500-154-30 Digimatic Caliper 0-150mm ±0.02mm 0.01mm Carbide-tipped jaws for OD measurement
    500-155-30 AOS Digimatic Caliper 0-150mm ±0.02mm 0.01mm Carbide-tipped jaws for OD and ID measurement
    500-158-30 AOS Digimatic Caliper 0-150mm ±0.02mm 0.01mm Ø1.9mm rod depth bar
    500-152-30 AOS Digimatic Caliper 0-200mm ±0.02mm 0.01mm -
    500-156-30 AOS Digimatic Caliper 0-200mm ±0.02mm 0.01mm Carbide-tipped jaws for OD measurement
    500-157-20 Digimatic Caliper 0-200mm ±0.02mm 0.01mm Carbide-tipped jaws for OD and ID measurement
    500-153 Digimatic Caliper 0-300mm ±0.03mm 0.01mm -
    500-500-10* Digimatic Caliper 0-450mm ±0.05mm 0.01mm Without Thumb Roller
    500-501-10* Digimatic Caliper 0-600mm ±0.05mm 0.01mm Without Thumb Roller
    500-502-10 Digimatic Caliper 0-1000mm ±0.07mm 0.01mm Without Thumb Roller

     

    產品型號過多,未上架商品亦可詢價。
    500181_ba.jpg


    來源:天津義諾達科技有限公司
    天津義諾達科技有限公司
    陳晨
    經營模式 :
    經銷批發
    所在地區 :
    天津市南開區華苑產業園區開華道12號普辰大廈A-07室
    哥要蝴蝶谷_蝴蝶谷娱乐网_哥要搞蝴蝶谷中文网